Crushing
From coarse primary opening to secondary reduction — choose the crusher route based on material hardness and finished size target.
- Jaw Crusher — primary
- Cone Crusher — hard-rock secondary
- Impact Crusher — shape-focused secondary
Stationary Equipment Catalog
Crushing, Screening & Sand Making Equipment
Complete stationary-line product catalog — feeding, primary crushing, secondary crushing, sand making, sand washing, screening, and conveying. Organized by stage so you can quickly find the right machine family.
HP Cone
PFW Impact
YK Screen
VSI Sand
Product Structure
Browse the lineup by stage
The catalog is organized by process role so buyers can quickly see which machine family belongs to which stage of the line.
Sand Making & Washing
VSI for manufactured sand production, wheel and spiral washers for cleaning and grading the finished sand.
- VSI Sand Maker
- Wheel Sand Washer (XD)
- Spiral Sand Washer (XL)
Screening & Feeding
Controlled feed, clean size classification, and oversize recirculation — the backbone of a well-organised stationary line.
- Vibrating Feeder
- Vibrating Screen
Conveying
Linking every stage from feed to finished stockpile with reliable, continuous material transfer.
- Belt Conveyor
Product Catalog
Full stationary-line equipment catalog
Each card shows the product, key parameters, and links to the dedicated page or inquiry form.
Crushing
Covers the full crushing route from primary coarse opening through secondary reduction. Choose jaw as the primary machine, then cone for hard-rock duty or impact for shape-focused and softer-material routes.
Primary Crushing
PE / C Jaw Platform
Jaw Crusher
Primary crusher for large feed material, hard rock, and front-end ore reduction. Handles the first coarse opening of the line.
Capacity40–625 t/h
Max FeedUp to 780 mm
Secondary / Tertiary
HP Multi-Cylinder Platform
Cone Crusher
Hard-rock reduction machine for stable output, good particle shape, and lower wear cost on abrasive materials such as granite, basalt, and quartzite.
Capacity100–300 t/h
CSS / Output5–40 mm adjustable
Secondary Crushing
PFW Hydraulic Impact Platform
Impact Crusher
Shape-focused crusher for softer stone, limestone, and recycling applications where cubical output and liberation matter more than extreme hard-rock duty.
Capacity120–300 t/h
Best FitLimestone, dolomite, recycled rubble
Sand Making & Washing
VSI produces manufactured sand and improves particle shape after the primary and secondary stages. Sand washers follow when cleanliness, powder reduction, or grading stability of the finished sand is required.
Sand Making
VSI2500 / VSI3150
VSI Sand Maker
Vertical shaft impact crusher for manufactured sand production. Used when the project needs 0–5 mm sand output or tighter control over fine aggregate grading.
Capacity100–300 t/h
Finished Sand0–5 mm manufactured sand
Sand Washing
XD Wheel Washer
Wheel Sand Washer
Compact wheel-type washer for cleaning manufactured sand after VSI and screening. Reduces stone powder and improves surface cleanliness of the finished 0–5 mm product.
Typical PositionAfter VSI + screen
Best For0–5 mm manufactured sand
Sand Washing
XL Spiral Washer
Spiral Sand Washer
High-intensity spiral washer for sand routes with heavier stone powder, mud, or clay load. Longer retention path delivers stronger scrubbing action than a wheel washer.
Best ForHigh fines / clay sand routes
AdvantageStronger scrubbing, tighter grading
Feeding, Screening & Conveying
Stable feed, clean sizing, and dependable material transfer. These modules are part of the sellable product lineup because they directly affect the throughput and commercial output of the whole plant.
Feeding
ZSW Plant Entry Feeder
Vibrating Feeder
Controlled feeding module that sets the rhythm for the whole line. Unstable feeding limits every crusher behind it — this product protects downstream utilization.
Typical PositionPlant entry before jaw or impact
ValueEven feed, surge protection
Sizing & Classification
3YK Circular Screen Platform
Vibrating Screen
Classification machine for separating crushed material into saleable product sizes and routing oversize back for further reduction.
Capacity70–500 t/h
Screen Type3YK circular vibrating
Material Transfer
Customized Conveyor Route
Belt Conveyor
Transfer equipment for inter-stage movement, return loops, and stockpile discharge. Keeps the whole plant connected with continuous, steady material handling.
Typical UseBetween crushers, screens, washers
SelectionLength, routing, transfer points
Selection Logic
Use the right process logic before you compare models
Good equipment matching follows a clear order. Buyers who share the right information first get a faster and more accurate equipment recommendation.
01
Confirm the raw material type and maximum feed size
Granite, basalt, limestone, recycled concrete, or ore all start the line differently. Lock down material type and the largest incoming lump size first.
02
Confirm the finished products you want to sell
Tell us how many final products you need, the target sizes, shape quality, and whether one size fraction needs a greater share in the grading mix.
03
Define the necessary process stages
From feed size to final size, we decide which stages the route needs: feeding, primary crushing, secondary crushing, sand making, screening, return loops, and washing.
04
Select equipment type, model, and quantity for each stage
Only after the route is clear do we narrow the product type, machine model, and number of units — so selection becomes accurate, not guesswork.
Applications
Where this equipment catalog is typically used
The same lineup serves different project models, but the emphasis changes with the material and commercial target.
Quarry & Aggregates
Jaw + cone or jaw + impact + screen routes when the target is multiple saleable aggregate fractions with stable day-to-day tonnage.
Mining Front-End Crushing
Feeder, jaw, cone, screen, and conveyor combinations to prepare ore before grinding, gravity separation, flotation, or magnetic separation.
Manufactured Sand Routes
VSI plus screening and washing when the project needs controlled fines, cleaner finished sand, and reliable grading for concrete or asphalt use.
FAQ
Questions buyers usually ask before comparing equipment
Is VSI a secondary crusher?
No. VSI belongs to the sand making stage. It is normally used after primary and secondary reduction to produce manufactured sand or improve fine aggregate particle shape.
When should I add a sand washer after VSI?
Add washing when the finished sand needs better cleanliness, lower powder carry-over, or tighter grading stability for concrete and asphalt applications.
What should I send first for equipment selection?
Material type, maximum feed size, required capacity, number of finished products, target sizes, shape quality requirement, and the desired grading share between products.
Do feeders, screens, and conveyors affect the saleable output?
Yes. Unstable feed limits crusher performance, weak screening reduces finished-size control, and poor transfer creates bottlenecks. These modules directly affect the commercial output of the line.
Need a product lineup, not just a machine quote?
Tell SUNREX your material, feed size, finished product targets, and whether you need sand making or sand washing. We can build the lineup stage by stage.